How To Change The Pitch Of A Song In Garageband?
Going to the menu bar and selecting “Track Show Transposition Track” will allow you to change the key of a track in your project. Changing the pitch (or pitches) of your song so that it fits into a different key is what we mean when we talk about transposing.
How to change the pitch of a track in GarageBand?
How to Adjust the Frequency of an MP3 File – To begin modifying the pitch of an MP3, use GarageBand and make a fresh empty project file before proceeding. This is the first step. If you are starting with a template, erase all of the current tracks (click to highlight then press “command” and “delete”).
- Locate the track you wish to transpose in the Finder window that appears when you open OS X in front of the GarageBand window.
- Simply click, drag, and drop the track into the center of the garageband window that is a dark gray color.
- The ability to move the file to the new location will be indicated by the appearance of a tiny green plus symbol next to the cursor.
This results in a new track being created from the music that was imported with an orange waveform. Once the music has loaded, the following is how it appears: Put the metronome off of its misery. Unless you are completely familiar with the song’s BPM, you are going to find it quite difficult to understand.
- You may turn off the metronome by going to the Control menu and unchecking the box.
- Alternatively, you may click the metronome box that is located in the control bar that is to the right of the heads-up display.
- Open the track data with the track that you want to listen to chosen.
- Simply choose the I symbol located in the lower right-hand corner of the screen.
At this point in the process, you may begin applying effects to the track in order to modify its pitch. Then, beneath the track picture, click where it says “browse” to go to where it says “edit.” A “rack” of effects, including a “noise gate” and a “compressor,” should be visible to you.
To activate an empty effect slot, click on it. This will provide a drop-down menu with a wide variety of effect customization choices. Scroll all the way down until you reach the second section labeled “Audio Unit Effects,” and then select the option labeled “AUPitch.” This loads an effect called pitch shift, which can change the key of the music.
To make changes to the settings, click on the picture of the effect. This will open a small window with four “knobs,” which are labeled Pitch, Effect Blend, Smoothness, and Tightness respectively. In most cases, I will set the values for Effect Blend, Smoothness, and Tightness all the way to 100%.
- Turn the Pitch knob to raise or lower the pitch of the music, as desired.
- It is measured in cents, which is a bit counter-intuitive, but if you know the conversion, it is straightforward to understand.
- One half step is equal to one hundred pennies.
- Taking a song from the key of A up to the key of B requires an increase of two half steps, or an increase of 200 cents.
Everything is important to keep in mind that the deeper you go, the stranger it sounds. Turn up the dial if you want to see slow-motion robots or hyper chipmunks, but only if you like seeing those things. When you play back your music, the pitch shifting effect will cause everything you hear to be transposed.
To deactivate the AUPitch, you need to click the light blue button that is located to the left of the effect slot. The pitch of a song may be altered in GarageBand, making it an ideal program to use when you need a quick and dirty solution. On the other hand, for the last few years I’ve been doing this same thing with the help of Anytune.
It is a fantastic piece of software that is far simpler to use than Garageband for the purpose of this task, and it produces recordings that are clearer even when transposing across large distances. Using their mystical spectrum analyzer, you can even slow down a song and isolate individual instruments for soloing.
How do I transpose a song in GarageBand?
How to Adjust the Frequency of an MP3 File – To begin modifying the pitch of an MP3, use GarageBand and make a fresh empty project file before proceeding. This is the first step. If you are starting with a template, erase all of the current tracks (click to highlight then press “command” and “delete”).
- Locate the track you wish to transpose in the Finder window that appears when you open OS X in front of the GarageBand window.
- Simply click, drag, and drop the track into the center of the garageband window that is a dark gray color.
- The ability to move the file to the new location will be indicated by the appearance of a tiny green plus symbol next to the cursor.
This results in a new track being created from the music that was imported with an orange waveform. Once the music has loaded, the following is how it appears: Put the metronome off of its misery. Unless you are completely familiar with the song’s BPM, you are going to find it quite difficult to understand.
- You may turn off the metronome by going to the Control menu and unchecking the box.
- Alternatively, you may click the metronome box that is located in the control bar that is to the right of the heads-up display.
- Open the track data with the track that you want to listen to chosen.
- Simply choose the I symbol located in the lower right-hand corner of the screen.
At this point in the process, you may begin applying effects to the track in order to change its pitch. Then, beneath the track picture, click where it says “browse” to go to where it says “edit.” A “rack” of effects, including a “noise gate” and a “compressor,” should be visible to you.
To activate an empty effect slot, click on it. This will provide a drop-down menu with a wide variety of effect customization choices. Scroll all the way down until you reach the second section labeled “Audio Unit Effects,” and then select the option labeled “AUPitch.” This loads an effect called pitch shift, which can change the key of the music.
To make changes to the settings, click on the picture of the effect. This will open a small window with four “knobs,” which are labeled Pitch, Effect Blend, Smoothness, and Tightness respectively. In most cases, I will set the values for Effect Blend, Smoothness, and Tightness all the way to 100%.
Turn the Pitch knob to raise or lower the pitch of the music, as desired. It is measured in cents, which is a bit counter-intuitive, but if you know the conversion, it is straightforward to understand. One half step is equal to one hundred pennies. Taking a song from the key of A up to the key of B requires an increase of two half steps, or an increase of 200 cents.
Everything is important to keep in mind that the deeper you go, the stranger it sounds. Turn up the dial if you want to see slow-motion robots or hyper chipmunks, but only if you like seeing those things. When you play back your music, the pitch shifting effect will cause everything you hear to be transposed.
- To deactivate the AUPitch, you need to click the light blue button that is located to the left of the effect slot.
- The pitch of a song may be altered in GarageBand, making it an ideal program to use when you need a quick and dirty solution.
- On the other hand, for the last few years I’ve been doing this same thing with the help of Anytune.
It is a fantastic piece of software that is far simpler to use than Garageband for the purpose of this task, and it produces recordings that are clearer even when transposing across large distances. Using their mystical spectrum analyzer, you can even slow down a song and isolate individual instruments for soloing.